ESITTELYMALLI 1 KPL ERIKOISHINTAAN!
Pulpettiradio joka on erityisesti termiikkiliidokkien, rinneliidokkien ja moottorilennokkien lennätykseen suunniteltu radio.
Erittäin tukeva ja ominaisuuksiltaan monipuolinen radio, joka kestää vuodesta toiseen. Erittäin laadukkaista osista koottu ja mikä tärkeintä ohjelmisto on ERITTÄIN helppokäyttöinen. Jopa niin, että et tarvitse edes käyttöhjetta. Vapaat asettelut katkaisijoille, Syntikka (et tarvitse enää kiteitä, vaan voit valita taajuuden lähettimestä 61-80 + B-band taajuudet)
Specification
Transmission system: SPCM 20 / PCM 20 / PPM 18 / PPM 24 selectable
RF module: Integral transmitter Synthesizer module (35 / 35 B-band, 40 / 41 MHz band)
Channel spacing: 10kHz
Control functions: SPCM= 10, PCM= 10, PPM= 9, PPM 24= 12
Basic control functions: 6 functions
Control channels: 10
(4 proportional with trims, 6 proportional or switched) plus 2 software control functions
Channel pulse width: 1.5 ms + 0.5 ms
Servo travel resolution: SPCM 20 10-bit (1024 steps), PCM 20 9-bit (512 steps)
Temperature range: - 15 ... +55°C
Telescopic aerial: 10-section, approx. 1470 mm long
Operating voltage: 9.6 ... 12 V
Current drain approx. 40 mA (excl. RF module)
Dimensions approx. 225 x 215 x 70 mm
Weight approx. 900 g excl. transmitter battery
Description
Four-language dialogue menu (German, English, French, Italian)
Twenty model memories
Synthesizer channel select with security menu to avoid the transmitter being switched on accidentally
Selectable modulation types: SPCM, PCM 20, PPM 18, PPM 24
Twelve control functions: simplified method of assigning control elements such as primary sticks, external switches, proportional controls and trim levers as transmitter control functions for multi-function model boats and cars, without the need to install external switches or switch modules
Future-proof: update-capable operating system
3-D Rotary Encoder in conjunction with four programming buttons for easy, convenient and accurate setting of values
MULTI-DATA GRAPHIC LCD monitor: high screen resolution for accurate monitoring and precise graphic display of curves and characteristic lines
Real Time Processing (RTP): settings and changes take place virtually in real time
ADT (Advanced Digital Trim System)
CONVENIENT MODE SELECTOR: simple method of switching stick modes 1 - 4 (e.g. throttle right / throttle left)
Three freely programmable mixers for RC model aircraft, helicopters, boats, cars and trucks
Three-point mixers for throttle, collective pitch and tail rotor, plus gyro offset. These settings can be entered separately for each flight phase
Fixed-wing / Helicopter: Dual Rate / Expo for Ch2 - Ch4 (switchable in common for each channel)
Phase trim according to model type: camber-changing flaps, ailerons, elevator
Helicopter swashplate mixers for 1-point, 2-point, 3-point and 4-point linkages
Comprehensive fixed-wing mixer menu with twelve set-up programs for two ailerons and two camber-changingflaps (number of servos)
Servo travel settings for twelve servos, servo reverse, servo centre, servo travel, variable separately for each side, graphic display for all servos
Fail-Safe programmable for PCM / SPCM
Two switch-operated timers, stopwatch and flight time / running time
HELP BUTTON with notes relating to the currently selected programming menu
Trainer system with total control transfer; all settings entered at the Teacher transmitter
Nautic control function for operating the Nautic Expert module
Model copy function for all model memories
